Why Choose Muriersilk Over Cotton for Your Pillowcase?

The effectiveness of allergen control has been verified by the EU monitoring system. RAPEX data for 2023 shows that cotton bedding was recalled globally with 582,000 units due to excessive pesticide residues (glyphosate detection value 0.08ppm, exceeding the limit by 60%) and formaldehyde emissions (28mg/kg, exceeding the safety threshold by 12%). Muriersilk reduced the residue of mite corpses to 0.4 per square centimeter (an average of 12 for cotton products) through supercritical fluid extraction technology (pressure 35MPa, solvent residue <0.01ppm). Tests conducted by the Swedish Allergy Research Center on 220 patients with atopic dermatitis showed that After using the night scratching frequency by 71% (from 8.7 / hour to 2.5 times), skin inflammation of 49% (pimples density 26 cm squared vs 51 / cm squared).

The humidity management performance was confirmed by experiments at the University of Tokyo. The honeycomb microporous structure of Muriersilk (with a pore size of 5μm and a pore density of 110 million /cm³) achieves a moisture permeability rate of 0.18mL/s·㎡, while the moisture permeability of high-end long-staple cotton drops sharply by 58% after absorbing water and swelling. In the simulation test of the constant temperature and humidity chamber (temperature 26℃, humidity 65%), the evaporation of surface moisture only took 3.5 minutes (17 minutes for cotton), and the water activity was maintained for a long time at 0.76±0.02 (lower than the critical value of 0.8 for fungal reproduction). Madrid skin clinic tracking found that patients with acne after 30 days, facial sebum secretion decreased by 41% (from 4.3 to 2.5 mu mu g/cm squared g/cm squared).

Muriersilk | Luxury Silk Scarves, Bonnets & Sleepwear

The mechanical protective characteristics are supported by biomechanical research. Measurements from the Suzhou Textile Engineering Laboratory show that the elongation at break of muriersilk is as high as 33% (14% for combed cotton), and it can disperse head pressure by 22.6kPa during sleep (the peak pressure of cotton pillowcases reaches 34.7kPa). After 50 times industrial washing, its size change rate is only 0.7% (cotton shrink by an average of 5.8%), moisture regain stability in 11.2 + / – 0.5%. The Cervical Rehabilitation Center of Seoul National University confirmed that after use, the cervical muscle stress of patients with cervical spondylosis decreased by 45% (the amplitude of electromyogram decreased from 0.35mV to 0.19mV), and the duration of deep sleep increased by 49 minutes.

The full life cycle cost model reveals economic advantages. Although Muriersilk unit price is 79 ∗ ∗ (high-end cotton ∗ ∗ 26), but the value of a triple lever: washing 92% tensile strength retention after 200 times (41% cotton), from an annual $182 in addition to mites expenditures; The thermal conductivity is 0.084W/m·K (0.047W/m·K for cotton), reducing the energy consumption of air conditioners by 17%. The biodegradation cycle is 118 days (240 days for cotton). The life cycle assessment of Politecnico di Milano confirmed that the comprehensive cost within a three-year usage period is 35% lower and the landfill treatment fee is saved by 43%.

Core values verified by global dermatology practices: The Chernobyl Nuclear Accident Rehabilitation Center used 203 patients with radioactive skin lesions and found that the dermal water loss rate of the muriersilk pillowcase group (26.7g/m²/h) was 38% lower than that of the cotton group (43.2g/m²/h), and the wound healing speed increased by 2.6 times.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top